Standing Seam Metal Roofs at Shingle Prices
The Best Roof You Can Put on a Florida Home
Standing seam metal is the gold standard for residential roofing in Florida. It handles hurricane-force winds, reflects UV instead of absorbing it, resists corrosion, and lasts 50 years or more with minimal maintenance. The problem has always been cost — most contractors quote metal at two to three times the price of shingles. Wilson Roofing changed that equation.
We own our roll-forming equipment and buy materials direct from the manufacturer. That means we form panels on-site to the exact dimensions of your roof and pass the savings on to you. Our customers routinely get standing seam metal roof quotes that compete directly with what other companies charge for basic architectural shingles. It's the same reason homeowner after homeowner says the choice was a no-brainer.
Get a Free Metal Roof Estimate
Panels Cut to Your Roof, On Your Street
Most metal roofing contractors order pre-cut panels from a supplier. The panels ship in standard lengths, get trimmed on site, and the waste goes in the dumpster — along with your money. Wilson Roofing brings the roll-forming machine directly to your property and forms every panel to the exact measurement of your roof. Zero waste, perfect fit, and no seams where you don't need them. Longer panels mean fewer fastener points and fewer potential leak paths. It's a better install and a lower cost, which is why we can price metal to compete with shingles.
"I got a quote for a metal roof that was literally DOUBLE what Wilson's quote was. And Wilson's had better specs, materials, and add-ins."
See our profile
Built to Handle the Worst Florida Throws at It
Florida is one of the hardest environments for any roofing system. Daily UV exposure breaks down asphalt shingles within 15–20 years. Afternoon storms drive rain into every gap. And when a hurricane rolls through, anything that isn't mechanically locked to the structure is at risk. Standing seam metal addresses all three: the panels interlock with a raised seam that's crimped or snapped shut — no exposed fasteners for water to penetrate. The reflective surface bounces UV and heat instead of absorbing it, which keeps your attic cooler and your energy bills lower. And rated for winds up to 140+ mph, a properly installed standing seam roof stays put when shingles are airborne two counties over.
"Brad delivered on his promise to be the lowest cost estimate on a new metal roof for our home. They were great to work with from start to finish."
See our profileYour Roof, Your Look
Metal roofing doesn't mean one color or one style. Wilson Roofing offers standing seam panels in a wide range of colors and finishes — from classic charcoal and bronze to bold green, blue, and galvalume silver. Kynar/PVDF paint finishes resist fading and chalking for decades, so the color you pick on day one is the color you'll still see 30 years from now. We'll bring samples to your property so you can see how each option looks against your siding, trim, and landscaping before you commit.
Looking at a full roof replacement? Most of our replacement customers upgrade to metal once they see the price comparison side-by-side.
"Outstanding Roofing company. Respectful workers, honored property with appropriate cleanup. Price of metal roof was very reasonable, even comparable to a quote on a shingle roof."
See our profileStanding seam panels in charcoal, bronze, green, blue, galvalume, and more. Kynar/PVDF finishes resist fading for decades. We bring samples to your property so you can see them in person.
See the Finished Product
Every image below is a real Wilson Roofing metal roof installation on a real home in the Tampa Bay and Sarasota area. No stock photos, no renders — just actual standing seam systems we've built for our customers. Browse through and see what your home could look like with a metal roof that's built to last a lifetime.
"Just had a metal roof installed. A high-quality metal roof with competitive pricing to shingles made my choice a no-brainer. The crew was good and efficient."
See our profile
Tampa Bay's Metal Roofing Specialist
Metal roofing is what we do best — and what we're known for. Here's why homeowners across Tampa and Sarasota choose Wilson Roofing for their metal roof installation.
- Standing seam metal priced competitively with architectural shingles
- On-site roll forming — panels cut to your roof's exact dimensions
- 100+ verified five-star Google reviews
- Licensed, insured, CertainTeed & GAF certified
- Manufacturer warranties up to 50 years on materials
Your Metal Roof in 6 Steps
From your first call to your finished roof, here's how a Wilson Roofing metal roof installation unfolds.
1. Call or Request a Quote
Reach out by phone or through our form. We'll schedule a time to inspect your roof and discuss your options — usually within a few days.
2. Free 20-Point Inspection
We inspect the full roof system — decking, ventilation, flashing, and drainage. You get a written report with photos and a clear recommendation.
3. Detailed Metal Roof Estimate
We provide an itemized quote covering panel profile, color, underlayment, trim, labor, and timeline. No hidden costs — what you see is what you pay.
4. Material & Install Scheduling
Once approved, we order your materials and lock in an install date. Our roll-forming equipment and coils arrive the morning of your project.
5. Tear-Off & Metal Install
Full tear-off of your old roof, decking inspection and repair, new underlayment, and standing seam panels formed and installed on-site.
6. Walkthrough & Cleanup
We walk the property with you, verify every detail, and leave your property cleaner than we found it. Your metal roof is done and warranted.
Metal Roofing FAQ
We own our roll-forming equipment and purchase raw coil stock directly from the manufacturer. That cuts out the middleman and eliminates waste from pre-cut panels. Panels are formed on-site to the exact measurements of your roof, so nothing gets trimmed and thrown away. The savings go straight into your quote.
No. A properly installed standing seam metal roof with solid decking and underlayment is no louder than any other roofing material. The panels sit on plywood sheathing with a synthetic underlayment barrier — there's no hollow drum effect. Most homeowners tell us they can't hear the difference during a storm.
A well-installed standing seam metal roof typically lasts 50 years or more. The panels resist corrosion, UV degradation, and wind uplift far better than asphalt shingles. Many metal roofs outlast the mortgage — and the next one after that. Manufacturer warranties commonly cover 30–50 years on materials.
Many Florida insurers offer discounts for metal roofs because of their superior wind resistance and fire rating. The exact savings depend on your carrier and policy, but it's worth asking your agent for a re-quote once the install is complete. Some homeowners see meaningful annual savings.
We offer standing seam panels in a wide range of colors including charcoal, bronze, green, blue, galvalume silver, and more. All finishes use Kynar/PVDF paint systems that resist fading and chalking for decades. We'll bring color samples to your property so you can see how they look against your home before making a decision.
In some cases, yes — but Wilson Roofing recommends a full tear-off in almost every situation. Layering over old shingles hides decking damage, traps moisture, adds unnecessary weight, and can void manufacturer warranties. A clean tear-off lets us inspect and repair the decking, install fresh underlayment, and ensure the new metal system performs exactly as it should for decades to come.
We are very happy with our new metal roof. The crew did a professional job. We highly recommend Wilson for quality, and price.
Related Roofing Services
Roof Replacement
Full tear-off and replacement with premium metal or shingle systems. Most customers upgrade to metal once they compare pricing.
Learn MoreMetal Roof Repair
Panel damage, loose fasteners, or flashing failure? We repair all types of metal roofing systems across Tampa Bay and Sarasota.
Learn MoreRoof Coating
Extend the life of an existing metal or flat roof with a protective coating system that seals, waterproofs, and reflects heat.
Learn MoreWhy Homeowners Trust Wilson Roofing
Licensed & Insured
Fully licensed Florida roofing contractor with workers' comp and liability coverage on every metal roof install.
100+ Five-Star Reviews
Over one hundred verified Google reviews from homeowners who chose Wilson for their metal roof. Perfect 5.0 rating.
Locally Operated
Based in the Tampa and Sarasota area. We live in the communities we serve and stake our reputation on every job.
Certified Professionals
CertainTeed and GAF certified with BBB A+ accreditation. Our certifications back up the quality of our work.
Transparent Pricing
Detailed written estimates with no hidden fees. Metal roof pricing that competes with shingles — verified by our customers.
On-Site Roll Forming
We bring the equipment to your property and form panels to your roof's exact specs. Better fit, less waste, lower cost.
Areas We Serve
Get a Metal Roof at a Price You Won't Believe
Wilson Roofing makes premium standing seam metal roofing accessible to every homeowner in Tampa Bay and Sarasota. One call gets you a free inspection, a transparent quote, and a roof that outlasts everything else on the market.
Call or Request a Quote
Call 941-422-1737 or fill out the online form. We'll schedule a free inspection at a time that works for you.
Get Your Metal Roof Estimate
After inspection, you'll receive an itemized quote showing metal and shingle pricing side by side. See the difference for yourself.
Get Your New Metal Roof
Approve your quote and we handle everything — tear-off, on-site roll forming, install, cleanup, and final walkthrough.